To make its own carrier sheet with the grid for the remnants.
Download Carrier Sheet (187)
You will need:
- 2 A4 card stock (160-200 gsm)
- A4 laminating pocket (and of course a laminator)
- Xyron tape for Workstation with removable adhesive (removable adhesive spray or wide two-way Glue (Zig) works of course)
- Removable tape
Check the following settings in RoboMaster:
File / Document Settings / Use Registration Marks to be bent
File / Output Setting / Print Cut Lines should be bent
Edit / Grid Settings / Grid Spacing shall be 10mm
This is consistent with it may want to check out.
- Print page and you now have a copy of the screen, with grid, on paper.
- Laminating a blank paper
- Glue the printed sheet of what you are laminated
- Tape the edges where the rollers will go with the removable tape
- Run the whole package of Xyron or spaya with removable adhesive
- Remove the removable tape
- Dutta, eg kökshanduk one if it appears to the sticky
Voila, the world's best Carrier Sheet, where you can place small pieces of paper exactly.
Here's my out (accidentally put it upside down on nystämplat 
) That would be done for istf inches. metrics.
